A branded DJ booth with blue uplighting at a Visa networking event at the Good Hotel, London.
For corporate clients and private parties, we can have a custom board printed to fit one of our black booths. The boards are cut from thin plastic, measured to the booth and printed with your artwork or logo. We send you a design proof first, so we need at least 7 days’ notice before your event date.
The boards then arrive at your venue before the event as flat-pack sheets, about a metre across and very thin, so they can be laid flat against a wall until needed. Once the DJ has set up the main rig, they fix the boards to the booth on site with special tape, which takes 30 to 45 minutes.
A custom branded booth is typically £250 in total: £50 for the booth frame, £165 for the custom print sheets and delivery, and £35 for fixing the boards to the booth. Not every DJ on our roster supplies and fits these, so tell us about your branding when you enquire and we’ll confirm which DJs can do it for your date.
The UDG fold-out table opens to 136 cm wide, 48 cm deep and 91 cm high. The folding mesh booth measures 99 cm across the front and 111 cm high, with 50 cm side panels.
Yes. The UDG table takes a branded board on the front. The folding booth can take boards on the front and both sides, or a fabric scrim over its panels.
Ideally 3–6 mm. Heavier boards, such as 18 mm wood, are too heavy to fix to the booth.
Clear stickers can work on the UDG case, but they leave a residue that is hard to remove, so we prefer boards.
Yes. Once you’ve chosen a booth and what you want to cover, we’ll confirm the exact size of each panel.
Scrims are made for specific booths, and many booths look similar. Send us the scrim’s measurements or a link and we’ll check it against our booth before you order.